CYBEX Ion Series Assembly Instructions Manual page 19

13. Select the LBS (7.5) or KG (3.75) option of the increment weight cap. Press increment weight cap into the head plate assembly.
14. Thread head plate pulley bracket through the jam nut and into the head plate bayonet. See
NOTE: Check proper thread engagement. To do so, attempt to pass a 7mm Allen wrench through the portal in the head plate
bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum depth.
Item
1
2
Item
1
2
3
Incorrect Depth: Thread engagement not deep enough.
Page 17 of 34
Description
Increment Weight Cap
Head Plate Assembly
Cable Handling Guide
Description
Head Plate Pulley Bracket
Nut, M16 Hex Jam
Head Plate Bayonet
Qty.
1
1
for details.
Qty.
1
1
1