Page 1
Cybex MG-525 Owner’s and Service Manual Strength Systems Part Number 15CBX109072 A www.cybexinternational.com...
Page 2
Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.
Cybex MG-525 Owner’s Manual 1 - Safety Safety Read the Owner’s Manual carefully before assembling, servicing or using the equipment. It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper operation of the equipment and review all labels.
Cybex MG-525 Owner’s Manual • Make sure that each machine is set up and operated on a solid level surface. Do not install equipment on an uneven surface. • Make sure that all users are properly trained on how to use the equipment.
Cybex MG-525 Owner’s Manual 3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the equipment to the fl oor. 4. Due to the wide variation of fl ooring on which machines may be anchored or installed, verify anchoring method and anchoring fasteners with a qualifi...
Page 7
Cybex MG-525 Owner’s Manual WARNING CAUTION SERIOUS INJURY COULD OCCUR IF THESE PRECAUTIONS ARE NOT OBSERVED 1. Obtain a medical exam before beginning any exercise program. 2. Stop exercising if feeling faint, dizzy or experiencing pain and consult your physician.
Cybex MG-525 Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in Chapter 5.
Cybex MG-525 Owner’s Manual 2 - Exercises Intended Use The intended use of this equipment is to aid or improve general physical fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings prior to using this machine. See Chapter 1, Safety, in the Owner’s Manual or consult with fl...
Cybex MG-525 Owner’s Manual Chest Press START FINISH NOTE: Motion Developed: Shoulder Flexion, Elbow Extension Set Up MUSCLES USED 1. Adjust handles and backrest to the chest press position. 2. Adjust seat bottom and back so that handles are at mid- chest.
Page 14
Cybex MG-525 Owner’s Manual Incline Press START FINISH NOTE: Motion Developed: Shoulder Flexion, Elbow Extension Set Up MUSCLES USED 1. Adjust handles and backrest to the Incline Press position. 2. Adjust seat bottom and back so that handles are at mid- chest.
Page 15
Cybex MG-525 Owner’s Manual Overhead Press START FINISH NOTE: Motions Developed: Shoulder Abduction, Elbow Extension Set Up 1. Adjust handles and backrest to the shoulder press position. 2. Adjust seat bottom so that hands are slightly above shoulder. 3. Select hand position that allows hands to fi nish above the shoulders.
Page 16
Cybex MG-525 Owner’s Manual Low Row START FINISH NOTE: Motion Developed: Shoulder Extension, Elbow Flexion Set Up MUSCLES USED 1. Adjust bench so that it is in the Low Row position. 2. Adjust the (Lat Pull) thigh pad so that it is facing upward.
Page 17
Cybex MG-525 Owner’s Manual Lat Pull START FINISH NOTE: Motions Developed: Shoulder Adduction, Elbow Flexion Set Up MUSCLES USED 1. Adjust bench so that it is in the Lat Pull position. 2. Adjust thigh pad for stabilization during exercise. 3. Grasp bar and sit with thighs under pads.
Page 18
Cybex MG-525 Owner’s Manual Prone Leg Curl START FINISH NOTE: Motions Developed: Knee Flexion Set Up MUSCLES USED 1. Adjust bench so that it is in the Prone Leg Curl position. 2. Align leg pad for a comfortable placement behind ankles.
Cybex MG-525 Owner’s Manual Leg Extension START FINISH NOTE: Motion Developed: Knee Extension Set Up MUSCLES USED 1. Adjust bench so that it is in the Leg Extension position. 2. Adjust back pad so that when seated, your knees align with the machine’s axis of rotation.
Cybex MG-525 Owner’s Manual 3 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183.
Cybex MG-525 Owner’s Manual 1. Call the Customer Service Hot Line listed above for the return of any item that is defective. 2. Provide the technician with a detailed description of the problem you are having or the defect in the item you wish to return.
Cybex MG-525 Owner’s Manual 4 - Assembly PRE-ASSEMBLY (English) NOTE: Two people will be required for this procedure. NOTE: It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance around each machine to allow for safe use and passage.
Cybex MG-525 Owner’s Manual Chapter 5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Page 49
Cybex MG-525 Owner’s Manual More Difficult Stains • Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite), 90% water. Rub gently. Rinse with a water dampened cloth to remove bleach concentration. • The same procedure can be used with full strength household bleach, if necessary.
Page 50
Cybex MG-525 Owner’s Manual 4. Guidelines for cleaning front panel: • Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing. • Follow up the application with warm water rinse. • Don’t use abrasives or high alkaline cleaners.
Cybex MG-525 Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all belts (entire length) for any non-uniformity and wear. Immediately replace belt if any of the following conditions are present: Maintenance...
Page 52
Cybex MG-525 Owner’s Manual 3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and attachment points.
Page 53
Cybex MG-525 Owner’s Manual 4. Inspect bars and handles for wear, paying particular attention to tab area connecting points. Replace all worn handles immediately. 5. Inspect snap links for proper latching (indicates wear). Replace all worn snap links immediately. Inspect for loose or worn grips.
Page 54
Cybex MG-525 Owner’s Manual Environment Static Electricity - Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object.
Page 55
Cybex MG-525 Owner’s Manual This page intentionally left blank Maintenance Page 5-8...
Cybex MG-525 Owner’s Manual CHEST PRESS/INCLINE PRESS/OVERHEAD PRESS PRODUCT NO. MG-525 NOTE: See exploded-view diagram for location of A (Placard), E (cable), I (serial number decal) and J (Weight Selector Pin) DESCRIPTION PART NO. DESCRIPTION PART NO. F. Back Pad ....15CBX109021 A.
Page 57
Cybex MG-525 Owner’s Manual LOW ROW/LAT PULL PRODUCT NO. MG-525 NOTE: See exploded-view diagram for location of A (Placard), D (cable), H (serial number decal) and I (Weight Selector Pin) DESCRIPTION PART NO. DESCRIPTION PART NO. F. Foam........15CBX109032 A.
Page 58
Cybex MG-525 Owner’s Manual PRONE LEG CURL/LEG EXTENSION PRODUCT NO. MG-525 NOTE: See exploded-view diagram for location of A (Placard), E (cable), I (serial number decal) and J (Weight Selector Pin) DESCRIPTION PART NO. DESCRIPTION PART NO. F. Back Pad......15CBX109042 A.
Page 59
Cybex MG-525 Owner’s Manual ITEM PART NO QTY DESCRIPTION ITEM PART NO DESCRIPTION 68 0202004304 round head hex socket bolt 1 5CBX109001 base frame 69 020200200 mushroom head hex socket bolt 15CBX109002 top frame 70 15CBX109023 main upright ( lat pull down)