CYBEX Ion Series Assembly Instructions Manual page 14

5. Install screws securing seat glide bushing to main frame using a Phillips screwdriver.
6. Install screws and washers securing the overhead frame assembly to the tower frame using an 8mm Allen wrench.
7. Install screws, washers, and locknuts securing the pulleys to the pulley brackets on the tower frame using an 8mm Allen wrench
and a 17mm wrench.
Item
1
2
3
4
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Item
1
2
3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
5
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
Page 12 of 34
Description
Seat Post Assembly
Seat Glide Bushing
Seat Frame
Screw, M5 x 10, Phillips
Description
Overhead Frame Assembly
Screw, M10 x 1.5, 25mm
Washer, Flat 3/8"
Description
Pulley, 3.5" OD
Screw, M10 x 1.5, 45mm
Screw, M10 x 1.5, 50mm
Washer, Flat 3/8"
Nut, M10 x 1.5, Hex Nylock
Qty.
1
1
1
2
Qty.
1
8
8
Qty.
4
2
2
6
2