Johnson Controls TEC3010 Installation Instructions Manual page 34

Table 10: Menus and Submenus (Part 2 of 8)
Level 1 Level 2
(LCD Screen Name)
Schedule Schedule Options
Optimal Start Enable
Temp Occ Duration
Motion Sensor Timeout
Manual Occupancy Mode*
Schedule Source
Display Settings Passcode Enable
Passcode*
Brightness Setting
Enable Backlight Timeout
Units
Time
Time Zone
Set Time Format
Date
Set Date Format
Show Fan Icon
Show Temp
Show Humidity
Show Off Icon
Show Hold Icon
Show Setpoint
Show Alarms
Show Occ Status
Show Unit Status
Show Date/Time
Control Setup General
Control Mode
Unit Enable
Fan Mode*
Max Setpoint Offset
Fan On Delay*
Fan Off Delay*
Frost Protection
Dehumidification Enable*
TEC3000 Series Wireless Proportional Fan Coil and Individual Zone Thermostat Controllers with Dehumidification
Level 3
(Default Values)
No
120 minutes
15 minutes
No Override
Local
No
NA
8
Yes
IP
N/A
Central
24 hour
N/A
YYYY-MM-DD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Auto
Enable
Smart
3 degrees
30 seconds
30 seconds
Yes
No
Capability Installation Instructions
34
1
Available Values
Yes or No
0 to 300 minutes
15 to 240 minutes
No Override, Occupied, Unoccupied
Local or BAS
Yes or No
0000 to 9999
* Passcode Enable = Yes
0 to 10 (most dim to brightest)
Yes or No
IP or SI
—
All World Time Zones
24 hour or 12 hour
—
YYYY-MM-DD, or Day, Month DD, YYYY,
or MM-DD-YYYY
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Yes or No
Auto, Cooling, or Heating
Enable or Shutdown
On, Auto, and Smart for single- and
variable-speed fans. Low, Medium, High,
Auto, and Smart for multi-speed units.
* Fan Coil units only
0 to 20 degrees (°F or °C based on Units
setting under Display Settings menu)
0 to 120 seconds
* Fan coil units only
0 to 120 seconds
* Fan coil units only
Yes or No
Yes or No