Using The Audio Mixer - Videonics MXPro User Manual

118
Chapter 12
U A
SING THE
Tip
M
UDIO IXER
MXPro's Audio Mixer provides extensive control over all audio channels. You can, for
example, subdue the audio on one channel (such as background music) and pump up
the audio on another (such as the narrative).
To access the Audio Mixer, press AUDIO MIX in the Functions button group.
Channel Sliders
+6
+3
0
-3
-6
-10
-20
-30
-°
Background Music
Channel Sliders – Control the audio on the four standard MXPro channels — A, B, C,
and D. You can also control audio coming through the COLOR channel if you first
route the audio through that channel on the ROUTE screen. See "Route" beginning on
page 77 for further instructions.
Background Music – This control works in conjunction with Input 4 to provide constant
audio from a source (whether it be music, narrative, or whatever). That is, if you con-
nect an audio source to channel D, you can control that source using the Background
Music slider.
If you connect a microphone to MXPro, use the Background Music slider to control
microphone volume.
Headphones – Controls the output through the MXPro headphones jack. Note that the
headphones monitor only one channel at a time, except during transitions.
Channel Mixer – Controls the mix between the Background Music channel and the
channel audio.
When not using the Background Music feature, set the MIX channel slider all the way to the
bottom.
COLOR MIX
Headphones
Videonics MX-Pro User Guide
Channel Mixer