Videonics MXPro User Manual page 162

154
Videonics MXPro User Guide
Setup Mode Differences.
MX-1 Setup functions can be found on the MXPro ROUTE screen.
MXPro Setup contains most of the functions found in MX-1 Advanced Setup, with
the following changes and additions:
GPI Mode Added – See "GPI Out
Mode" on page 76 and "Using a GPI
Device" on page 126 for further
information.
Comb Filter Added – See "Comb Fil-
ter" on page 76.
Frame/Field Freeze Added – See
"Force Field Freeze" on page 76 and
"Freeze" on page 83.
Frame Rate Lock and Noise Filter
Removed
Headphone Control Moved – Con-
trols for adjusting headphones are
now found on the Audio Mix screen.
See "Using the Audio Mixer" on
page 118 and "Using Headphones"
on page 120.
MXPro Contains NVRAM.
MXPro uses NVRAM ( N on- V olatile R andom A ccess M emory) to store many differ-
ent settings while the unit is powered down. When you subsequently turn the
unit back on, all of the stored settings automatically reactivate.
1 0 1 1
COLOR
+6
+3
0
-3
-6
-10
-20
-30
-
Appendix E
MIX