Manipulating Tiles; Positioning Tiles; Sizing Tiles - Videonics MXPro User Manual

96
Chapter 9
M
ANIPULATING
IMPORTANT
INFORMATION

Positioning Tiles

Sizing Tiles

T
ILES
You can place foreground tiles anywhere you want on the screen. You can set their size,
fill them with color or images, and set their border characteristics.
Remember , once you place and define a foreground tile you cannot change it. Placing
the tile occurs once you move the Compose Cursor (or, rectangle) to any other position
on the screen. You'll learn about the Compose Cursor in this section.
When you press the COMPOSE button to enter Compose mode, MXPro shows your
choice of background on both the Preview and Output monitors. MXPro also displays a
flashing rectangle at the center of the Preview screen. This flashing rectangle is called
the Compose Cursor .
The Compose Cursor (a
flashing rectangle)
appears on the Preview
screen when you enter
Compose mode.
Use the JOYSTICK to move the Compose cursor where you want it on the screen. You
can also use the ARROW keys to make fine adjustments.
You can make foreground tiles any size you want, from covering the entire screen to a
thin horizontal or vertical line.
Always establish the size of the tile before filling it with a solid color, moving video, or
a still image.
Use the SHIFT key in conjunction with one of the ARROW keys to adjust tile size. Enter
SHIFT+0 (zero) to restore the tile to its default size.
SHIFT
SHIFT
Enter SHIFT+FLIP
SHIFT+FLIP to reproportion the tile based on its current height.
to reproportion the tile based on its current width. Enter
Videonics MX-Pro User Guide
JOYSTICK positions Compose Cursor
SHIFT
SHIFT