Using The Audio Mixer - Videonics MXPro DV User Manual

W A
ORKING WITH UDIO
U A
SING THE UDIO
MXProDV's Audio Mixer provides extensive control over all audio channels. You can,
for example, subdue the audio on one channel (such as background music) and
pump up the audio on another (such as the narrative).
To access the Audio Mixer, press
Audio Channels—Select the audio channel you want to adjust or monitor by using
the NEXT keys (
ground audio channel). If there is no audio on the channel you select, verify the
Route information using the Route function.
Volume Slider and Level Meters—Use the level meters to visually monitor the output
audio signal for the selected input channel. Use the slider to adjust the volume. If 4-
channel audio output is selected (Setup menu), the slider is divided into two halves.
The left half controls the volume for Audio 1 (channels 1 & 2); the right half controls
the volume for Audio 2 (channels 3 & 4). A middle position lets you adjust both
Audio 1 and Audio 2 simultaneously.
Background Mixer—Use this slider to control the mix between the current audio
source and the background audio.
•
•
•
Headphone Slider—Use this slider to control the volume of the audio played in the
headphones.
M
IXER
Audio
Channels
Volume Sliders and
Level Meters
/ ,
NEXT A NEXT
If the slider is all the way down, there is no mix: 100% of the audio comes from
the selected audio channel.
If the slider is all the way up, 100% of the audio comes from the background
audio channel. (You define what audio is used for background audio in the Route
menu.)
If the slider is somewhere in between, part of the audio comes from the current
channel (A, B, C, D or Color) and part of it comes from the Background Audio
channel.
TIP
If Background Audio is not being used, be sure to set the Background Mixer slider all the way
down.
in the Functions button group.
AUDIO MIX
Background
Headphone volume
Mixer
/ , ..., / , or
B NEXT COLOR
U A
SING THE UDIO
+ / for the back-
SHIFT NEXT COLOR
M 141
IXER