Mosaic; Color Correct - Videonics MXPro User Manual

68
Chapter 6
M
OSAIC
C C
OLOR ORRECT
CAUTION
Tip
Adjusts overall color values throughout the entire image. You cannot, how-
ever, apply Color Correction to PIP tiles.
You can set Color Correction values separately for each channel.
Parameter Values — Zero or one.
0 = Off: 1 = On
Apply Color Correction BEFORE going live or rolling tape. Because of the way MXPro
implements Color Correction, the Program Output might be affected temporarily.
Procedure
To use Color Correct:
1
Press COLOR CORRECT to display the Input Effects menu, or press INPUT
EFFECTS then use the ARROW keys to highlight the Color Correct icon.
2
Press the NEXT button that corresponds to the source you want to correct. For
example, to apply color correction to channel C, press NEXT/C.
3 Turn on the Color Correct option. That is, either press 1 on the keyboard, or press
COLOR CORRECT so the parameter value equals 1.
MXPro replaces the Input Effects menu with a preview of the color corrected
image.
4
Use the JOYSTICK to adjust the RGB (Red, Green, and Blue) values in the image.
5
Use the T-BAR to adjust the luminance of the image.
6 When the image looks the way you want, press OK to exit from Input Effects
mode.
When you apply Color Correction to only one channel, it remains On during all transitions.
When you apply it to more than one channel, it turns Off while the transition runs, then back
On again when it finishes. Use Cut transitions only when applying Color Correction to more
than one channel.
Divides picture into tiles.
Parameter Values — Zero through seven. Zero turns
off the effect.
Low values create numerous, small tiles. High values
create fewer, larger tiles. Highest values might make
image difficult to recognize.
Videonics MX-Pro User Guide