Videonics MXPro User Manual page 118

110
Chapter 11
Example...
Tip
Tip
Other buttons count as one step, including SPEED , FREEZE , SETUP , INPUT EFFECTS ,
ARROW keys, CURRENT and NEXT sources, and so forth.
The following Learned Script consists of 7 individual steps:
1
Press NEXT/B to select that device as the NEXT source (step one).
2
Press SPEED to increase the speed of the transition (step two).
3 Press SPEED again to increase the transition speed one more unit (step three).
4 Press SPEED once more to increase transition speed another unit (step four).
5 Enter 55 to designate that transition (steps five and six).
It requires two steps to enter the two digits.
6
Press PLAY (step seven).
Using ARROW keys to select a transition consumes one step for each key pressed. In most
cases, to fit as many transitions as possible into a Learned Script, use the numeric keypad to
enter transition numbers rather than using the ARROW keys.
Select the CURRENT and NEXT sources before entering LEARN mode. LEARN mode interprets
pressing the CUT button as a transition.
Videonics MX-Pro User Guide