Playing The Composition - Videonics MXPro User Manual

Compose
P
LAYING THE
Note
3
Use the JOYSTICK or ARROW KEYS to position the Compose Cursor where you
want it on the screen.
4 Size the Compose Cursor to the size you want for the foreground tile.
You can do the two preceding steps in either order.
5 Press one of the NEXT buttons to fill the tile with whatever color or image you
want.
a
Solid Color Background – Press NEXT/COLOR to fill the tile with the cur-
rently selected color.
To specify a different color from the one currently selected, press BG COLOR
until the color you want fills the tile.
To create a custom color for the tile, press LEARN+BG COLOR, then use the
JOYSTICK and T-BAR to create a new color. Press OK when the tile color is
the one you want.
b
Moving Video Sequence – Press the appropriate NEXT button to select source
A, B, C, or D. If the dimensions of the tile and video do not match, the video
appears distorted.
c Frozen Image – Fill the moving video tile with the image you want, then
press FREEZE.
6
Repeat steps 3 through 5 until your composition is complete.
7
Use the PLAY button or T-BAR to send your composition to the Program.
C
OMPOSITION
Procedure
To play a composition on the output device:
¨ Press PLAY or use the T-BAR.
Moving the T-BAR from the top-to-bottom in its slot transitions the composition
to Program. Moving it from bottom-to-top dissolves out.
Pressing PLAY produces a cut from the CURRENT source to the composed screen —
using the T-BAR produces a dissolve. Pressing PLAY or using the T-BAR again lets you
switch back and forth between the CURRENT source and the composed image.
If you cut to any source or exit from Compose mode, your composed screen will be lost
and cannot be recovered.

Playing the Composition

99