Using Other Effects With Single Pips; Table 11 Manipulating Pips Mask - Videonics MXPro User Manual

90
Chapter 8
Manipulating the Mask The mask changes shape, size, and position when you change the corresponding

Using Other Effects with Single PIPs

Input Effects You can apply any of the input effects (see Chapter 6, Input Effects ) to the background
The Freeze Effect You can apply the Freeze effect (see "Freeze" on page 83) to the background and/or
You can apply the following shapes to PIP tiles.
To select a shape, press the numeric key (0 through 9) that corresponds to the shape
you want, as indicated below.
0 1 2
5 6 7
attribute of the foreground tile. You can, however, manipulate the mask indepen-
dently, as described in this section.
Table 11: Manipulating PIPs Mask
To change
Use or press...
mask...
Position
SHIFT+JOYSTICK
Style
(Press keys repeatedly to cycle through available colors and styles.)
BORDER COLOR
BORDER STYLE
Size
SHIFT+T-BAR
SHIFT+UP ARROW
SHIFT+DOWN ARROW
SHIFT+RIGHT ARROW
SHIFT+LEFT ARROW
and/or foreground tile. Apply the input effect(s) you want prior to entering PIP mode.
foreground tile.
Press FREEZE while in PIPs mode to freeze the background. Press FREEZE again to
release the freeze effect.
Press SHIFT+FREEZE while in PIPs mode to freeze the foreground tile. Press
SHIFT+FREEZE again to release the freeze effect.
When you exit PIPs mode, MXPro removes the freeze effect from the foreground source.
3 4
8 9
Notes...
Change mask position.
Change mask border color.
Change mask border style.
Change mask size.
Increase vertical size of mask.
Decrease vertical size of mask.
Increase horizontal size of mask.
Decrease horizontal size of mask.
Videonics MX-Pro User Guide