Adjusting Transitions; Changing Transition Speed - Videonics MXPro User Manual

58
Chapter 5
A T
DJUSTING
Note

Changing Transition Speed

Tip
RANSITIONS
Every transition runs at a pre-set speed and direction. Symbols appear below the tran-
sition icon in the Transitions Menu indicating the current speed and direction.
Transition Icon
Transition Speed
Use the SPEED and REVERSE buttons to change the speed and/or direction of a
transition.
Transition Direction
When you change a transition's speed and/or direction, the change applies to all
other transitions until you specifically change it. For example, if you set the speed of
the current transition to 4, all subsequent transitions run at this same speed until you
again change the speed factor. This also applies to transition direction.
Transition speed values can range from 0 (slowest) to 9 (fastest).
Procedure
To change the transition's speed:
¨ Press SPEED. Each press increases the speed by one unit. Press SHIFT+SPEED to
decrease the speed by one unit.
MXPro changes the Transition Speed indicator below the transition icon to the cur-
rently selected value. You can change the speed any time either prior to running the
transition, or while it runs (which allows you to make adjustments "on the fly.")
To directly set the speed to a specific value, press and hold the SPEED button while entering a
value from 0 to 9 on the numeric keypad.
Transition Direction
REVERSE
Transition Speed
SPEED
BG COLOR
Videonics MX-Pro User Guide