Special Key Combinations; Table 7 Input Effects Mode Key Combinations; Table 8 Main Mode Input Effects Key Combinations - Videonics MXPro User Manual

Input Effects

Special Key Combinations

Use the following key combinations while working with the Input Effects menu.
Table 7: Input Effects Mode Key Combinations
Key Combination
ARROW KEYS
Numeric Keypad
INPUT EFFECTS
EFFECTS buttons
SHIFT+0 (zero)
When you are not working at the Input Effects menu, use the following key combina-
tions.
Table 8: Main Mode Input Effects Key Combinations
Key Combination
SHIFT+EFFECTS button
SHIFT+INPUT EFFECTS
When the Input Effects LED light is lit, Input Effects are enabled . MXPro applies the
effects according to the parameter values for each effect.
When you use the SHIFT+INPUT EFFECTS key combination to disable Input Effects,
MXPro turns off the LED light. It does not change any effects parameter values, but it
does prevent the current Input Effects from being used. Press SHIFT+INPUT EFFECTS
again to enable them.
Result
Moves cursor (or, highlight) between the different Input
Effects.
Directly sets the parameter value for the highlighted
effect.
Exits from Input Effects mode.
Moves the cursor directly to that effect – for example,
press POSTERIZE to highlight that effect: press
MOSAIC to highlight that effect: and so on.
If the selected effect matches the currently highlighted
one on the Input Effects menu, pressing the EFFECTS
button increments the effect's parameter value by one.
Resets all effects to 0 (off) for the selected channel.
Result
Increments the parameter value by one for the selected
effect and applies it to the CURRENT source.
Temporarily disables Input Effects from being sent to
Program out. See the following paragraph.
Special Key Combinations
65