Selecting Transitions; Using The Transitions Menu - Videonics MXPro User Manual

56
Chapter 5
S T
ELECTING
Note

Using the Transitions Menu

RANSITIONS
To select a transition to use between the CURRENT and NEXT sources, do one of the
following:
• Use the ARROW keys to select from the Transitions Menu on the Preview screen;
or,
• Enter the transition's assigned number on the MXPro numeric keypad, then press
OK.
Preview
Screen
When selecting from the USER category, you must always use the ARROW keys to select a
transition from the Transition Menu on the Preview screen. Entering a transition number
and pressing OK replaces the current transition with the one you select.
The Transitions Menu appears just below the preview images on the Preview screen
when you set the Preview to STANDARD or TWO CHANNEL mode (see "Display"
beginning on page 73 for more information about Preview modes).
Use ARROW keys to select
a transition from the
Transition Menu on the
Preview Screen...
or
...enter the transition
number on the keypad...
then press OK.
Blue highlights the selected transition
Videonics MX-Pro User Guide
1 2 3
4 5 6
...
7 8 9
0
Numeric
Keypad
Each icon in the
menu represents
one transition.
OK