Videonics MXPro User Manual page 163

Information for MX-1 Users
Transitions Organized Differently
All transitions available with the MX-1 are also available with MXPro, but you can
now select from more than 500 different effects. See Appendix A, Transitions List ,
for a complete description of what is now available.
USER BASIC EDGES
Pressing any Transition Category button display the menu of transitions avail-
able in that category.
The ARROW keys move you only within the current category. To get to a differ-
ent one, press a different Transition Category button (see page 52).
Take Bar Operations
MXPro's Take Bar provides added control over transitions by running it in the
direction indicated by the transition direction setting.
Transition Direction Setting
See "Operating the T-BAR" beginning on page 61. Chapter 5, Transitions , contains
several sections explaining use of the Take Bar.
Transitions Compatibility
If you are upgrading to MXPro from the Videonics MX-1 Video Mixer, the transitions in
the Basic category are the same as the MX-1.
MXPro provides a set of hot keys that directly correspond to the MX-1 Effect buttons.
Using the hot keys (Table 6, MX-1 Compatibility Hot Keys on page 53) causes the MXPro
Preview screen cursor to appear at the beginning of each section within the Basic
(MX-1) category.
MX-1 buttons such as Flips, Wipes,
and Fade/Dissolve no longer exist.
TRAILING SHAPES
Instead, MXPro categorizes transi-
tions into these five groups.
155