Fujitsu PRIMERGY RX300 S2 User Manual page 89

■ Checking Server Free Space
Decide a server to use as a remote resource server / PXE server and check it for enough free space for
storing resources.
●
Checking the Number of Servers
• When you have only one server, use it as the remote resource server, PXE server, and DHCP service
server. Check it for the required amount of free space.
• When you have multiple servers
• Check if a server performing the DHCP service exists. If not, decide a server for the DHCP
service.
• When there are multiple resources, they can be divided and stored in multiple remote resource
servers.
●
Checking Server Free Space
The following table shows the amount of free space required for each installation resource.
table: Free Space Required for Resources
Resource
ServerStart
Windows Server 2003
Windows 2000 Server
Windows 2000 Service Pack 4
Calculate the total resource size. Check that the remote resource server / PXE server has enough free
space (free space greater than the space required for the resources). When the amount of free space is
insufficient, you must use more remote resource servers.
Required free
space
About 650MB
644MB
472MB
433MB
PRIMERGY RX300 S2 User's Guide
3
89