Fujitsu PRIMERGY RX300 S2 User Manual page 118

Chapter 4 Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
3. Select the following and press the [Enter] key.
LSI MEGARAID Products for Windows 2003 (x86)
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver.
5
When a Fibre Channel Controller (PG-FC106) is installed, install the fibre
channel card driver.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives,
or special disk controllers for use with Windows,
including those for which you have a device
support disk from a mass storage device
manufacturer, press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the fibre channel card driver disk
created from the ServerStart CD-ROM and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to returnto the
previous screen.
3. Select the following and press the [Enter] key.
Emulex LP9802 PCI-Fiber Channel HBA
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the
Windows default driver.
6
Follow the instructions from the setup program to continue the installation
procedure.
If a message indicating that the driver has failed in the Windows logo test for validating the
compatibility with Windows appears, select [Yes] to continue the installation procedure.
118