Fujitsu PRIMERGY RX300 S2 User Manual page 218

Chapter 7 Installing Internal Options
■ Connection of Other External SCSI Options
External SCSI options with different SCSI-IDs are connected in a daisy chain as shown in the following
figure. Up to two devices can be connected.
<External SCSI option>
■ Notes on Connecting External SCSI Options
●
SCSI-ID Setting
Do not use the same setting for different devices.
●
Terminator
Install a terminator to the external SCSI option at the end of the daisy chain.
Alternatively, use the auto termination function of the external SCSI option.
Be sure to use the terminator supplied with a SCSI device only on that device.
●
SCSI Cable
Select the SCSI cable for connecting a SCSI device depending on usage.
External device
External SCSI option
(Half-pitch 68 pins)
PRIMERGY SX10
(Half-pitch 68 pins)
PRIMERGY SX10
(Half-pitch 68 pins)
External SCSI option
(Half-pitch 68 pins)
Backup cabinet PG-R1BC4
(Half-pitch 68 pins)
Backup cabinet PG-R1BC4
(Half-pitch 68 pins)
218
<The server>
table: SCSI cable list
Connected device
Server
SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins)
SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins)
SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins)
SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins)
SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins)
SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins)
SCSI Ctrl U160/ SCSI Ctrl U160 lp (PG-128/PG-130L)
SCSI cable
(For PG-128: attached item to the external SCSI option,
For PG-130L: GP5-846: sold separately)
SCSI cable
(Attached item to the external SCSI option)
Terminator
(Attached item to the external SCSI option,
or optional auto termination function)
Model name
GP5-846
PG-CBLS007
PG-CBLS008
-
PG-CBLS001
PG-CBLS002
Length Remarks
Sold separately
2m
1.8m Sold separately
5.0m Sold separately
- Supplied with
external SCSI
options
1.5m Sold separately
5.0m Sold separately