Fujitsu PRIMERGY RX300 S2 User Manual page 79

• If a message prompting you to insert the ServerStart CD-ROM appears, insert the CD-ROM
and click [OK].
4
When a message prompting you to insert the OS CD-ROM appears, insert the
CD-ROM and click [OK].
After files are copied, a message prompting you to insert the ServerStart CD-ROM appears.
5
Insert the ServerStart CD-ROM and click [OK].
The License Agreement window appears.
6
Click [I Agree].
After files are copied, a message prompting you to eject the CD-ROM and floppy disk appears.
7
Eject the CD-ROM and floppy disk and click [OK].
The system restarts. The system continues the installation operation after restart. OS GUI setup,
LAN utility installation, Service Pack installation, and Active Directory installation are
performed automatically.
8
When a confirmation message appears on restart, click [Restart].
The system restarts and installs high reliability tools. Installation is performed automatically.
9
When a message on installation completion appears, press any key.
10
Restart the system.
Click [Start] → [Shutdown]. Select [Restart] and click [OK]. The system restarts.
11
When the system restarts, log on to the server using the Administrator account
for the local computer.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" ( pg.129) and perform necessary procedures
before starting server operations.
PRIMERGY RX300 S2 User's Guide
3
79