Fujitsu PRIMERGY RX300 S2 User Manual page 236

Chapter 8 Hardware Configuration/Utilities
Item
CPU Halt Mode (C1E)
NX Memory Protection
CPU MC Status Clear
Enhanced SpeedStep
CPU Throtting Delay
USB Host Controller
USB2.0 Host Controller
USB BIOS Legacy
Support
236
table: Items on the Advanced System Configuration Submenu
Setting
Standard (Fixed parameter)
Disabled (Fixed parameter)
Next Boot (Fixed
parameter)
Disabled (Fixed parameter)
No Delay (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
• Disabled (at the time of
purchase)
• Enabled
Description
Configures the CPU internal setting.
Configures the CPU internal setting.
Note:
This item is displayed only when the 3.6GHz
CPU is used.
Sets the time delay after which the CPU moves to
throttling when it overheats.
Sets whether or not to use the USB host controller
(2.0 or 1.1).
Sets whether to enable or disable a USB-compatible
keyboard in an MS-DOS environment.
This item cannot be selected when [USB Host
Controller] is set to [Disabled].