Fujitsu PRIMERGY RX300 S2 User Manual page 267

PRIMERGY RX300 S2 User's Guide
This is because the LAN driver for the network adapter recognized immediately after the OS installation
is not updated.
Clicking [Finish] in this window displays the [Help and Support Center] window. Click [X] to close this
window.
The "!" mark is displayed at the LAN device name in Device Manager. Device names are displayed
properly when all LAN drivers are installed and the system is restarted.
For details on LAN driver installation, refer to "4.3.1 Installing the LAN Driver (Windows Server
2003)" ( pg.124).
■ LAN Operation Fails or Error Message Appears during LAN Driver
Installation
A conflict may have occurred between system resources including the LAN and other expansion cards.
Delete all LAN drivers and check that conflicts between system resources do not exist. Then, restart the
system and install the LAN drivers.
"4.3 Installing the LAN Driver" (pg.124)
9
267