Fujitsu PRIMERGY RX300 S2 User Manual page 229

Item
Boot Menu
MultiBoot for HDs
Boot Sequence
table: Items on the Boot Options Submenu
Setting
Enabled (Fixed parameter)
• Disabled (at the time of
purchase)
• Enabled
Press [Enter] to display the
boot sequence.
• CD-ROM Drive
• Diskette
• Hard Drive
• Legacy LAN Card
PRIMERGY RX300 S2 User's Guide
Description
Sets whether to enable or disable the boot menu.
Sets whether or not it is possible to specify the
order of hard disks to boot the operating system
(OS) when several hard disk units are installed.
Note:
To perform a network boot (PXE), set to
[Enable].
Sets the order of selected drives to boot the OS. Use
the [+] [-] keys to change the order of priority for
the selected device. Booting from a selected device
can be disabled with the [Space] key. (The mark "!"
is prefixed to the name of the disabled device.) If a
non-existing device is displayed, delete it from the
list with the [*] key.
8
229