Fujitsu PRIMERGY RX300 S2 User Manual page 232

Chapter 8 Hardware Configuration/Utilities
Item
Parallel Mode
Diskette Controller
Floppy Type
Local Bus IDE adapter
Mouse Controller
SCSI Controller
SCSI Option ROM Scan
RAID
LAN Controller
LAN Remote Boot Ch.A
LAN Remote Boot Ch.B
232
table: Items on the Peripheral Configuration Submenu
Setting
• Printer
• Bidirection (at the time
of purchase)
• EPP
• ECP
• Enabled (at the time of
purchase)
• Disabled
Local (Fixed parameter)
Both (Fixed parameter)
• Disabled
• Enabled
• Auto Detect (at the time
of purchase)
ChannelA&B (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
Enabled (Fixed parameter)
ChannelA&B (Fixed
parameter)
• Disabled (at the time of
purchase)
• PXE
Description
Sets the data transfer mode of the parallel port.
Sets whether to enable or disable the floppy disk
controller.
Sets the type of floppy disk to be used.
When using the server's internal floppy disk drive,
select [Local].
Sets whether or not to use the IDE adapter.
Sets whether or not to use the mouse connected to
the mouse connector.
Sets whether to enable or disable the onboard SCSI
controller.
Sets whether or not to initialize the extended ROM.
Sets whether to enable or disable RAID.
Sets whether to enable or disable the onboard LAN
controller (channel A, or channels A and B).
Sets whether to enable loading of the OS from the
server. This function is used particularly when
neither a floppy disk drive or a hard disk drive is
installed or they are turned off.