Fujitsu PRIMERGY RX300 S2 User Manual page 243

Item
Action
Timeout Value
ASR&R Boot Delay
Power Cycle Delay
Boot Retry Counter
Diagnostic System
Temperature Monitoring
Memory Scrubbing
CPU Status
Memory Status
Console Redirection
RomPilot
table: Items on the Server Menu
Setting
• Continue
• Reset (at the time of
purchase)
• Power Cycle
• 0 (at the time of
purchase)
• 1–100
• 2 (at the time of
purchase)
• 1–30
5 (Fixed parameter)
• 3 (at the time of
purchase)
• 0–7
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Enabled (Fixed parameter)
[Enter]
[Enter]
[Enter]
[Enter]
PRIMERGY RX300 S2 User's Guide
Description
Sets the operation to be performed when a timeout
occurs during OS boot monitoring.
When [O/S Boot Timeout] is set to [Enabled], the
system restarts automatically if the OS fails to start
up within the time set for this item.
Sets the time required until the Automatic Server
Reconfiguration & Restart (ASR&R) function
reboots.
Sets the time until the server is turned on after it is
turned off.
Sets the maximum number of retries to boot the
operating system within the range of 1 to 7.
The count value is decremented by one after each
instance of retry processing.
Sets the operation to be performed when the
number of system boot retries exceeds the number
specified in [Boot Retry Counter].
Sets whether or not to turn the power off in the
event of abnormal temperature.
Sets whether or not to correct errors of memory
space that is currently not used by the OS or
application programs.
This submenu sets whether or not to allow the use
of the installed CPU.
"8.2.13 CPU Status Submenu" (pg.244)
This submenu sets whether or not to allow the use
of the installed memory.
"8.2.14 Memory Status Submenu" (pg.245)
This submenu configures detailed settings for
console redirection.
"8.2.15 Console Redirection Submenu" (pg.246)
This server cannot use this.
8
243