Fujitsu PRIMERGY RX300 S2 User Manual page 43

■ Cautions for Installing a Memory Module
This server supports up to 16GB of memory. However, the maximum installable size varies depending
on the OS. Furthermore, since the server uses part of the memory as PCI resources, the maximum
available size is limited.
The following shows the maximum installable size and the maximum available size.
OS
Windows 2000 Server
Windows Server 2003, Standard
*1
Edition
Windows 2000 Advanced Server
Windows Server 2003, Enterprise
Edition
*1: Windows 2000 Server and Windows Server 2003, Standard Edition support up to 4GB of memory.
*2: Windows 2000 Advanced Server support up to 8GB of memory.
*3: Because 0.1 to 0.6GB of memory is used as PCI resources, the available memory size varies depending on
the installed card.
BIOS setting for installing 4GB or more of memory
To install 4GB or more of memory, select the [Advanced System Configuration] submenu from the
[Advanced] menu of the BIOS Setup Utility and set [Remap PCI Memory Gap] to [Enabled]. For more
details, refer to "8.2.8 Advanced System Configuration Submenu" ( pg.235).
●
Cautions Applicable When the OS is Windows Server 2003, Enterprise
Edition or Windows 2000 Advanced Server
When installing 4GB or more of memory in a server operating with Windows 2000 Advanced Server or
Windows Server 2003, Enterprise Edition, the /PAE option in the "Boot.ini" file must be described. For
the procedure for editing the "Boot.ini" file, refer to the manual supplied with the OS.
The "Boot.ini" file is an important file for the system. If the file is edited improperly, the system may not
start up. Edit it carefully.
"Boot.ini" file description example
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)?WINNT="Microsoft
Windows 2000 Advanced Server" /PAE /fastdetect
■ LAN Cable
Be sure to connect the LAN cable when the server is not connected to the Internet. If the OS is installed
or applications are automatically installed without connecting the LAN cable to the LAN card, an error
may be recorded in the event viewer after setup completes.
table: Maximum Installable Size and Maximum Available Size
Installed memory
size
*1
3.0GB or smaller
4.0GB
*2
3.0GB or smaller
4.0 to 8.0GB
3.0GB or smaller
4.0 to 16.0GB
PRIMERGY RX300 S2 User's Guide
Available memory size
Same as the installed memory size
Installed memory size - (0.1 to 0.6GB)
Same as the installed memory size
Installed memory size - (0.1 to 0.6GB)
Same as the installed memory size
Installed memory size - (0.1 to 0.6GB)
2
* 3
* 3
* 3
43