Solving Monitoring And Controlling Problems; Solutions When You Cannot Monitor Or Control The Projector - Epson vs 230 Operation Manual

Solving Monitoring and Controlling Problems

Solutions When You Cannot Monitor or Control the Projector

Downloaded from ManualsNet.com search engine
• Close the network settings menu on the projector.
• Check the computer's network settings.
• Make sure you are using a computer that can connect to a wireless LAN.
• Enable the wireless LAN setting or AirPort on your computer.
• Connect to the same access point to which the projector is connected.
• Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the
necessary settings to open the port. The port used by this software is "56181" (TCP).
• Make sure no access point settings block connections to the projector, such as MAC Address
restrictions or port restrictions.
Parent topic: Solving Network Connection Problems
Related tasks
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
Try these solutions depending on your situation.
Solutions When You Cannot Monitor or Control the Projector
Solutions When Network Alert Emails are not Received
Solutions When You Cannot Broadcast a Message
Parent topic: Solving Problems
Try these solutions when you cannot monitor or control the projectors.
• Make sure the projector is turned on and connected to the network correctly.
• To monitor projectors even when they are in standby mode (when power is off), select
Communication On as the Standby Mode setting in the projector's menus. Also select the correct
Port setting, if necessary.
• Make sure the projector you want to monitor or control is registered to the Epson Projector
Management software.
• Turn off the DHCP settings for your projector. If you turn on the DHCP settings, the projector's IP
address changes automatically and the Epson Projector Management software may not be able to
search for the registered projector.
57