Connecting To The Vga Computer Port - Epson EX30 User Manual

caution
Don't try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
Setting Up the Projector
26
When you're done projecting from your computer, disconnect the
USB cable.

Connecting to the VGA Computer Port

You can connect to the projector using the VGA computer cable that
came with it (the monitor port on your computer must be a D-sub
15-pin port).
1. Connect one end of the VGA computer cable to the projector's
Computer (Component Video)
computer's monitor port.
EX30/EX50
2. You may need to change the
projector's Signal menu to
3. You can connect an optional audio cable to play sound through
the projector (see page 34).
4. You may also be able to use the remote control as a wireless mouse
(see page 53).
When you've finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
port and the other end to your
Computer (Component
Video) port
EX70
setting in the
Input Signal
(see page 64).
RGB