Creating Your Own Startup Screen; Capturing The Image - Epson PowerLite 8300NL User Manual

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen to be displayed when the projector is not receiving a signal
or when you press the
company logo, slogan, photograph, or any other image you want to
use.

Capturing the Image

Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
User's Logo
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
[ ]: Select [ ]: Execute
2. When you see the screen shown at right, select
. A selection box displays over the image.
Enter
3. Use the pointer button to select the area of the image you
want to use. Then press
4. When you see the message "Select this image?" highlight
press .
Enter
button. The image can be a
A/V Mute
.
Enter
Execute Execute
.
Enter
[Menu]: Exit
and press
Yes
and
Yes
Giving Your Presentation
note
You can also turn off the
message you see when there is
no signal, or when you
change picture sources or
color modes (see page 72).
Accept the present image as user's logo?
59