Note: You cannot change the Screen Type setting when the Content Playback setting is enabled. If
you change the Screen Type setting, the Geometry Correction settings are initialized.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select Display > Screen > Screen Type.
You see this screen:
5. Select your screen's aspect ratio and press Enter.
6. Press the Menu button to exit.
7. Adjust the aspect ratio for the projected image, if necessary.
Note: When the Screen Typesetting changes, the EDID settings are automatically adjusted.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
Using Basic Projector Features
99