Menu Settings; Displaying Of Menus - Sony NSS-S2 Installation Manual

1-12. Menu Settings

After the unit installation, you can perform the various settings using the Consol Menu.
The menu screen is displayed on the LCD of the control panel, which is located on the front of the HDDs.
(It is necessary to remove the front panel.)

1-12-1. Displaying of Menus

Displaying of MAIN menu
1. Remove the front panel, and turn on the power of the unit. (Refer to Section 1-7.)
UNIT : OK
MENU IN : ENT
2. Press [ENTER] key to open the MAIN menu screen.
ERROR INFO
IN: ENT
Displaying of CONFIGURATION menu
1. Remove the front panel, and turn on the power of the unit. (Refer to Section 1-7.)
The MAIN menu screen is displayed.
2. When the MAIN menu screen is displayed, display the "UNIT CONFIG" using [UP] or [DOWN]
key.
UNIT CONFIG
IN: ENT
3. Press [ENTER] key to open the CONFIGURATION menu screen.
SERIAL
10001
Returning to MAIN menu screen
1. On the CONFIGURATION menu screen, display the "EXIT" using [UP] or [DOWN] key.
EXIT: ENT
2. Press [ENTER] key to return to the CONSOL MENU screen.
NSS-S2
UP key
ENTER key
RIGHT key
DOWN key
LEFT key
1-13 (E)