Displaying Rmon Statistics - Enterasys VH-2402S Management Manual

Parameter
Internal Mac
Transmit Errors*
Carrier Sense Errors* The number of times that the carrier sense condition was lost or
Frames Too Long
Internal Mac
Receive Errors*
* The reported values will always be zero because these statistics are not
supported by the internal chip set.

Displaying RMON Statistics

Use the RMON Statistics screen to display key statistics for each port or
media module from RMON group 1. (RMON groups 2, 3 and 9 can only
be accessed using SNMP management software.) The following screen
displays the overall statistics on traffic passing through each port. RMON
statistics provide access to a broad range of statistics, including a total
count of different frame types and sizes passing through each port.
Values displayed have been accumulated since the last system reboot.
Drop Events
Received Bytes
Received Frames
Broadcast Frames
Multicast Frames
CRC/Alignment Errors:0
Undersize Frames
Oversize Frames
Fragments
[Refresh Statistics]
[Reset Counters]
<OK> <PREV UNIT> <NEXT UNIT> <PREV PORT> <NEXT PORT>
60 VH-2402S User Interface
Description
The number of frames for which transmission failed due to an
internal MAC sublayer transmit error.
never asserted when attempting to transmit a frame.
The number of frames received that exceed the maximum
permitted frame size.
The number of frames for which reception failed due to an internal
MAC sublayer receive error.
Vertical Horizon Local Management -- VH-2402S
RMON Statistics : Unit 1 Port 1
:0
:199299
:15746
:3249
:0
:0
:0
:0
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-47. RMON Statistics
Jabbers
Collisions
64 Byte Frames
65-127 Byte Frames
128_255 Byte Frames
256-511 Byte Frames
512-1023 Byte Frames
1024_1518 Byte Frames :35696
Show port : 1
[Show]
:0
:0
:37837
:674356
:45430
:20447
:3740
VH-2402S