System Configuration Page; System Configuration - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
PD trigger delay
CC channel detection

6. System Configuration Page

System Configuration

●
Parameter Setting
●
File
●
Instrument Info
●
Local/Remote
●
In non-running status, pressing the [System] button on the panel can enter the system
configuration page. The system configuration page includes <System Config>, <Para
Set>, <File>, <Info> and Local/Remote switching. Select the corresponding function keys
at the bottom of the panel to enter the corresponding setting page.
6.1 System Configuration
Press the [System] button on the panel to enter the <SYSTEM CONFIG> page, as shown
in Figure 6-1. Language, time, communication, etc. can be set on this page. For details,
please see Table 6-1.
Table 6-1 Parameters on System Configuration Page
System parameter
Language
Set the waiting time before initializing PD power
Check whether the CC1 and CC2 leads are connected well
Figure 6-1 System Configuration Page
Setting content
[CHN]/ENGLISH
59
Description
Set system language