System Configuration Page; System Configuration - UNI-T UTL8500 Series User Manual

screenshots and list test files. Press the "System" button on the front panel to enter the
SYSTEM CONFIG interface, and then press the [File] key at the bottom of the screen to
enter the file operation interface to delete, copy, and apply files.
The screenshot BMP file name saved by the electronic load is 12 digits composed of
date and time. The first six digits are the year, month and day, and the last six digits are
the hour, minute and second. The format of list file name is in LIST000.txt, and the last
two numbers indicate the group number of the test mode.
UTL8500 series electronic load can save commonly used test files in U disk or internal
Flash. Flash can save 60 groups of test files.
Note: The U disk used to save files must use the FAT32 file system. The allocation
unit size cannot be greater than 4096 bytes, and the maximum capacity is 32G. Please
format it in advance when using it, otherwise it may cause file storage failure. It is
recommended to use a branded U disk.

5. System Configuration Page

This chapter mainly covers the following:

Packing List

Requirements of Power Supply

Operating Environment

Cleaning

Handle of Instrument
In non-running state, pressing the [System] button on the panel can enter the system
configuration page. The system configuration page includes <System Config>, <Para Set>,
<File>, <Info> and local/remote switching. Select the corresponding function keys at the
bottom of the panel to enter the corresponding setting page.

5.1 System Configuration

Press the [System] button on the panel to enter the <SYSTEM CONFIG> page, as shown
in Figure 5-1. Language, time, communication, etc. can be set on this page. For details,
please see Table 5-1.
UTL8500 Series User Manual
40