Date; Warn Sound; Time; Dim Display - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
knob. If it is off, no sound will be emitted at any time when users operate the button or the
knob. The factory default key sound is on.

6.1.3 Date

It is used to set the current date of the system. Users first select the setting option, move
the cursor to the position to be modified by the left and right direction keys, and then rotate
the knob or directly enter the number with the keyboard to adjust the content to be
modified. Lastly, press to complete the modification.

6.1.4 Warn Sound

The UTL8500X series electronic load has warn sound function. When the load ends or
encounters an abnormal problem during the test, the electronic load will emit a warn
sound through the built-in buzzer. When the test is successful, the load will emit two short
beeps. When the test fails or encounters other abnormalities, the load will emit two long
beeps. The warn sound is on by default. If users need to change it, select this option on
the system configuration page and adjust it.

6.1.5 Time

Time setting is the same as the date setting. It is used to set the current system time.

6.1.6 DIM Display

In order to adapt to the operating environment of different brightness, the electronic load
has a screen brightness adjustment function, which can be changed in the system
parameters. Select the option DIM Display, press , rotate the knob or use the direction
keys to adjust to the required value, and then press to complete the setting.

6.1.7 Initial Mode

When the initial mode is selected as "Last", the status of the load each time it is powered
on is the test mode used before the last shutdown. If "Default" is selected, the electronic
load will enter a constant current (CC) test mode after each power-on.
61