Introduction Of Screen Display; Display Of Measurement Interface; Introduction Of Status Bar - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
Warning: Please make sure that the power supply voltage is consistent with the
supply voltage before turning on the power, otherwise the instrument will be burnt out.
Please be sure to connect the main power plug to a power socket with ground protection.
Do not use a wiring board without ground protection.

3.3 Introduction of Screen Display

After entering into the test mode, the LCD screen will be divided into several areas to
display different information.

3.3.1 Display of Measurement Interface

No. Items
1 Mode
2 Time
3 System icon
4 Parameters
5 Set value
6 Other parameters
Mode selection (soft
7
keyboard)

3.3.2 Introduction of Status Bar

Status description
Measurement
Figure 3-2 Interface of Measurement
Current measurement mode or status
Current system time
Display the status of U disk, remote compensation,
short-circuit test and trigger function
Real-time voltage, current and power
Mode setting information, voltage and current value
Real-time running time, other processes and result
data
Select the work mode and operate the corresponding
functions at the bottom of the screen
Display Status
Status (Mode) Current measurement status or work mode
17
Description
Description