Running Indicator; Measurement Settings - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
status
Control mode
Screenshot status
Trigger mode
Remote
compensation
USB status
System time
Alarm
Trigger ready
Start-up delay
Short-circuit
Pause operation

3.3.3 Running Indicator

UTL8500X series electronic load comes with running indicator on the ON button. In
on-load mode, the indicator will light up, indicating that the load is in a loaded status.
Pressing the ON button again can stop loading and the indicator will go out.

4. Measurement Settings

Constant State Test Modes (CC/CV/CR/CP)
●
More Modes (Dynamic, List, Dual, OCP/OPP, etc.)
●
Parameter Input and Loading Measurement
●
Waveform
●
Trigger Method
●
Sense
●
Screenshot
●
Saving and Applying of Configuration
●
Local/Remote Current operating mode: Local/Remote
Waiting/OK/Fail Saving the picture/saved successful/fail
Manual/External Current trigger mode: Manual/External
Sense displays on the screen: remote
Sense
compensation has been turned on
USB storage device has been connected
0000.00.00 Current system time: Year/Month/Date /Hour/
00:00 Minute
Audio alarm is on.
Wait for trigger, the icon will disappear after
Trig
triggering
Wait for start-up delay, the icon will disappear
Delay when reaching the delay time, and then start
up
Short In short-circuit test mode
Pause In pause status
18