Rear Panel - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual
7-Middle
Figure 1-2-3 Connection of Terminal and Quick Charge Test Board (UTL8511C)

1.3 Rear Panel

No.
① AC220/110V socket
② ON/OFF power button
1-2-3.
It is the male end of the quick-charging connector.
These 4 pins are used to connect the 4 terminal holes
of the female end of the quick-charging test board
assembly, as shown in Figure 1-2-3. Note: This jack
socket has a fool-proof design. You need to carefully
align the direction before matching.
Figure 1-3-1 Rear Panel
Table 1-3-1 Introduction of Rear Panel
Items
AC power input socket (with fuse)
Description
12