Language; Key Sound - UNI-T UTL8500X Series User Manual

Programable DC Electronic Load User Manual

Key sound

Date
Warn sound
Time
DIM display
Initial mode
Knob active
Address
Baud rate
SCPI set
Restore factory
setting

6.1.1 Language

The electronic load has two system languages (CHN/ENGLISH), which can be changed in
the system parameter settings. Select Language, turn the knob or change the up and
down direction keys to adjust to the needed language, and then press
the setting.
6.1.2 Key Sound
The key sound is used to set whether to sound when users operate the keyboard or the
knob. If it is on, the buzzer will emit a short sound when users press any key or rotate the
ON/OFF
Year/Month/Day
ON/OFF
Hour/Minute/Second|
1~5 levels of brightness
Default/Last
ON/OFF
001~032
9600/19200/38400/57600/115200
SCPI1/Own
Whether to enable key sound
Set system date
Whether to enable warn
sound
Set system time
Adjust the screen brightness,
5 levels
Default: boot into the constant
current (CC) interface
Last: boot into the last test
mode
If it is ON, the parameter will
change immediately after
rotating the knob.
Set the current
communication address
Set the baud rate of RS232
communication interface
SCPI1: general SCPI
protocol; Own: for internal
debugging
Choose to restore factory
settings: the device will delete
the current setting parameters
and restore to the state of
factory settings
60
to complete