Xerox EC70 User Manual page 148

Regulatory Information
ENERGY STAR
Power Consumption and Energy Saver Activation Time
The amount of electricity a product consumes depends on the way the device is used. This product is
designed and configured to enable you to reduce your electricity costs.
After the last print, the device switches to Ready mode. In this mode, the device can print again
immediately. If the device is not used for an interval of time, the device switches to Energy Saver
mode. In Energy Saver mode, only essential functions remain active, which permits reduced product
power consumption.
The product takes slightly longer to produce the first print after it exits Energy Saver mode than it
takes in Ready mode. This delay is the result of the system waking up from Energy Saver mode and is
typical of most imaging products on the market.
Before you turn off Energy Saver mode or set a long activation time, consider the increase in product
power consumption.
Before you turn off Energy Saver mode or set a long activation time, consider the increase in product
power consumption.
To learn more about Xerox participation in sustainability initiatives, go to
xerox/environment/enus.html.
Default Energy Saver Settings for Product
The printer is ENERGY STAR
Equipment. The transition time from Standby to Energy Saver mode, which can be up to 240 minutes,
is set to a default value of 1 minute. The transition time from Energy Saver mode to Sleep, which can
be up to 240 minutes, is set to a default value of 1 minute. The transition time from Standby to Sleep
for this printer can be up to 480 minutes.
To configure settings, refer to Setting Power Saver Mode in the System Administrator Guide.
148 Xerox ® EC70 Color Copier/Printer
User Guide
The ENERGY STAR program is a voluntary scheme to promote the
development and purchase of energy efficient models, which help to reduce
environmental impact. Details on the ENERGY STAR program and models
qualified to ENERGY STAR can be found at the following website:
energystar.gov/index.cfm?fuseaction=find_a_product.
showProductGroup&pgw_code=IEQ.
The ENERGY STAR and ENERGY STAR mark are registered United States
trademarks. The ENERGY STAR Imaging Equipment Program is a team effort
between United States, European Union, and Japanese governments and the
office equipment industry to promote energy-efficient copiers, printers, fax,
multifunction printers, personal computers, and monitors. Reducing product
energy consumption helps combat smog, acid rain, and long-term changes to
the climate by decreasing the emissions that result from generating
electricity.
® qualified under the ENERGY STAR Program Requirements for Imaging
www.
www.xerox.com/about-