Xerox EC70 User Manual page 49

2. To choose uncollated copies with separators:
a. On the Copy Output screen, touch Uncollated with Separators.
b. To choose the tray loaded with separator pages, touch Separator Tray, select a tray, then
touch Save.
Offset Stacking
To choose Offset Stacking:
1. On the control panel touch screen, touch Copy.
2. Touch Copy Output.
3. Touch Offset Stacking, then select the type of offset that you want to use.
4. If Paper Supply appears, select the required paper supply tray.
5. Touch Save until you return to the Copy tab.
Stapling Copies
If the printer has a finisher installed, copies can be stapled automatically.
To select stapling:
1. At the control panel, touch Copy.
2. Touch Copy Output.
3. On the Staple screen, touch One Staple, Two Staples, or Four Staples for your selected page
orientation.
For each orientation, the screen shows the location where staples are placed on the page.
Note: The stapling options vary, depending on the paper feed orientation, short edge, or
long edge. If the required stapling option is unavailable, touch Paper Supply, then choose
the appropriate tray.
Hole Punching Copies
If the printer has an appropriate finisher installed, copies can be hole-punched automatically.
Note: Hole punch options depend on paper size and feed orientation. The paper can be fed
from a tray with the paper loaded for short-edge feed or long-edge feed. If the required hole
punch option is unavailable, touch Paper Supply, then choose the tray containing the paper
with the correct orientation.
1. Touch Copy on the control panel.
2. Touch Copy Output.
3. For Hole Punch, select the required hole punch type and location from the list.
Note: Printer configuration varies the hole punch settings.
4. Touch Save.
I I m m a a g g e e Q Q u u a a l l i i t t y y A A d d j j u u s s t t m m e e n n t t s s
Use the Image Quality tab to change the following image quality settings:
Services and Functions
Xerox ® EC70 Color Copier/Printer
User Guide
49