Xerox EC70 User Manual page 54

Services and Functions
Specifying the Original Size
To specify the original size so that the correct area is copied:
1. On the control panel touch screen, touch Copy, then touch the Layout Adjustment tab.
2. Touch Original Size.
3. To pre-scan the first page of the originals to determine the area to copy, touch Auto Detect.
• If the area to be copied matches a particular paper size, touch Manual Size Input and then
touch the required paper size.
• To view the entire list, touch the scroll arrows.
4. If the original contains pages of different sizes, touch Mixed Size Originals.
5. Touch Save.
Erasing the Edges of a Copy
By specifying the amount to erase on the right, left, top, and bottom edge, you can erase content
from the edges of your copies.
To erase edges on copies:
1. On the control panel touch screen, touch Copy, then touch the Layout Adjustment tab.
2. Touch Edge Erase.
3. To erase all the edges by the same amount, touch All Edges, then touch the plus (+) or minus (-)
icons.
4. To specify different amounts for the edges, touch Individual Edges.
For each edge, touch the plus (+) or minus (-) icons.
5. If you select 2-sided copies, to specify the amount to erase from each edge on Side 2, touch the
plus (+) or minus (-) icons, or touch Mirror Side 1.
6. To cancel edge erase, touch Print to Edge.
7. To specify orientation of the original document as you place it in the document feeder or on the
document glass:
a. Touch Original Orientation.
b. Touch either Upright Image or Sideways Image (top to left).
c. Touch Save.
8. Touch Save.
Note: If preset values such as Hole Punch Erase or Header/Footer Erase were previously
saved, you can touch the preset in the lower-left corner of the window.
54 Xerox ® EC70 Color Copier/Printer
User Guide