Driver Assist Indicator; Combination Meter Settings; Illumination Brightness Control - Subaru Crosstrek Hybrid 2022 Owner's Manual

& Driver Assist indicator
1)

Driver Assist indicator

The Driver Assist indicator illuminates for
approximately 5 seconds after switching to
Hybrid Battery Save Mode or Hybrid
Battery Charge Mode.
It also blinks slowly when charging from an
external power supply is in progress.
The Driver Assist indicator setting can be
set on the combination meter. Refer to
"Driver Assist Indicator" FP221.
NOTE
The Driver Assist indicator also blinks
and illuminates when the EyeSight
system is operating. For details, refer
to the Owner's Manual supplement for
the EyeSight system.
& Combination meter settings
Meter and vehicle settings can be set on
the combination meter display (color
LCD). Refer to "Menu screens" FP220.

Illumination brightness control

3-4. Illumination brightness
control
The illumination brightness of the instru-
ment panel illuminates under the following
conditions.
. The light control switch is in the "
" " position when the ambient light is
dark.
. The light control switch is in the "AUTO"
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
– CONTINUED –
193
" or