15 ELECTRICAL SYSTEM
15.12
132
Changing the combination instrument battery
V01807-10
V00371-10
V00372-10
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
with the washers.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument with the label facing
upward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set the kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. (
p. 27)
while the engine is
p. 128)
2
all the way counterclock-
3
.
p. 162)
and turn all the way clockwise
p. 128)
p. 130)
p. 25)
p. 26)