Table A-6. Advanced Chipset Configuration
Submenu Categories (continued)
Category
82450GX C0 Host
Retry Timer
82450GX C0 P2P
Mode
AERR Mode
PERR Mode
Plug and Play Configuration Submenu
Latency Timer (PCI Clocks)
Boot With PnP OS
Figure A-6. Plug and Play Configuration Submenu
Function
Increases system performance (in some cir-
cumstances) if set to Enable, but is not
compatible with 2.1 specification PCI-to-
PCI bridge devices. Default is Auto
Configure. This option is used with
82450GX C0 stepping only.
Increases system performance (in some cir-
cumstances) if set to Disable, but is not
compatible with PCI-to-PCI bridge
devices. Default is Enable. This option is
used with 82450GX C0 stepping only.
Enables (default) or disables address parity
error detection on the microprocessor bus.
Enables or disables (default) detection of
PCI bus protocol violations.
Plug and Play Configuration
96
F1
ESC
None
Enter Select
F5
F6
F10
Help
Back
Previous Item
Next Item
Select Menu
Setup Defaults
Previous Value
Save & Exit
System Setup Program
A-11