General screen options
This section lists the primary hardware features of your computer.
Table 6. General screen options
Option
System Information
Battery Information
Boot Sequence
Advanced Boot Options
UEFI boot path security
Date/Time
System Configuration screen options
Table 7. System Configuration options
Option
Integrated NIC
76
BIOS overview
Description
This section lists the primary hardware features of your
computer.
● System Information: Displays BIOS Version, Service Tag,
Asset Tag, Ownership Tag, Ownership Date, Manufacture
Date, Express Service Code, the Signed Firmware update
—enabled by default
● Memory Information: Displays Memory Installed, Memory
Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM A Size, DIMM B Size
● Processor Information: Displays Processor Type, Core
Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache,
Processor L3 Cache, HT Capable, and 64-Bit Technology
● Device Information: Primary Hard Drive, Secondary Hard
Drive, Video Controller, Video BIOS Version, Video
Memory, Panel Type, Native Resolution, Audio Controller,
Wi-Fi Device, Bluetooth Device, Cellular Device
Displays the battery status health and indicates whether the
AC adapter is installed.
Enables you to change the order in which the system boots an
operating system.
● Windows Boot Manager ( Default)
● Merlin Non-Pxe
● Onboard NIC (IPV4)
● Onboard NIC (IPV6)
● Boot List Option
○ Legacy
○ UEFI (System Default)
Enables you to load either the legacy option ROMs in UEFI
boot mode or only option ROMS without UEFI mode.
Enables you to control system prompt of How to enter the
Admin Password (if set) when you boot a UEFI boot path
from the boot menu.
The valid options are:
● Always, except internal HDD ( Default)
● Always
● Never
Enables you to change the system date and time.
Description
Controls the on-board LAN controller.
● Enabled w/PXe by default