Front-Panel Inserts; Figure 4-5. Front-Panel Insert Removal - Dell 6100 Service Manual

4-6 Dell PowerEdge 6100/200 System Service Manual

Front-Panel Inserts

latch (2)

Figure 4-5. Front-Panel Insert Removal

To remove a front-panel insert, follow these steps:
1. Remove the front bezel.
2. From the back of the front bezel, press against the center of the insert
until the tabs come loose from the bezel.
3. Pull the insert out of the bezel.
To replace a front-panel insert, position the insert over the bay opening from the
inside of the front bezel and carefully press the insert into place. A tab on each
side of the insert snaps into a corresponding latch on the inside of the front
bezel.
front-panel insert
tab (2)
back of the
front bezel