Memory, Microprocessor, And Termination Module; Figure 4-18. Memory, Microprocessor, And Termination Module; Removal - Dell 6100 Service Manual

Dell poweredge 6100 servers: service manual
Hide thumbs Also See for 6100:
Table of Contents

Advertisement

Memory, Microprocessor, and Termination Module

memory module
secondary
microprocessor or
termination module
primary
microprocessor
module

Figure 4-18. Memory, Microprocessor, and Termination Module

Removal

1. Remove the left computer cover.
2. Remove the support panel.
3. Remove the module.
Grasp the module by the corners and carefully pull the module out until the
edge connectors are free from the system board connectors.
NOTES: Both microprocessor module connectors must be populated. The
secondary can have another microprocessor module or a termination
module.
Be careful not to touch components or the gold edge connectors on the
module.
Removing and Replacing Parts
4-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge 6100/200

Table of Contents