Table A-9. Exit Menu Categories
Category
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Function
Saves the changes you have made before
you exit the system setup program. The
next time you boot up, the BIOS configures
your system according to the selections
stored in NVRAM
.
Exits the system setup program without
saving any of the changes you have made.
Loads the default values for each menu in
the system setup program.
NOTE: If you load the default values,
change the MPS Version option described
earlier in this section from 1.1 to 1.4.
Any changes made since the system setup
program was run are deleted, but you will
not exit the system setup program.
System Setup Program
A-15