Figure 1-8. Dc Power Connector Pwr1; Figure 1-9. Dc Power Connector Pwr2 And Pwr3 - Dell 6100 Service Manual

1-12 Dell PowerEdge 6100/200 System Service Manual
NC_3INH
common (black)
POWER_GOOD (gray)
common (black)
+5 VFP (violet)
PWR1
-12 VDC (blue)
-5 VDC (white)
PWR_STAT_BIT (gray)
2
I C_SDA (gray)
2
I C_SCL (gray)
NOTE: The signals (5) from pins 7, 9, 14, 17, and 18 are not connected to the
system board. The thirteen remaining signals are passed to the system board
through a 14-pin connector. Pin 7 on the system board connector is not used.

Figure 1-8. DC Power Connector PWR1

+3.3 VDC (orange)
common (black)
+12 VDC (yellow)
common (black)
+12 VDC (yellow)
11
PWR2,
PWR3
1
+5 VDC (red)
common (black)
+5 VDC (red)
common (black)
+5 VDC (red)

Figure 1-9. DC Power Connector PWR2 and PWR3

10 11 12 13 14 15
16
1 2 3 4 5 6 7
12 13 14 15 16 17 18 19 20
6 7
2 3 4 5 8
+3.3 VDC sense (orange)
-3.3 VDC sense (black)
FAN_TACH (gray)
NC_NRLED
17 18
8 9
BAT_V (gray)
PRES_DET (gray)
NC_+12 sense
+5 VDC sense (red)
common (black)
+3.3 VDC (orange)
common (black)
+3.3 VDC (orange)
common (black)
9 10
common (black)
+5 VDC (red)
common (black)
+5 VDC (red)
common (black)